TOPZQ02RH Emulgoiva hydraulisekoitin II

Tuotetiedot

● The stirring is subject to frequency conversion to set the speed so that the stirring line speed is arbitrarily adjusted within 0-150m/min to meet different process requirements.

● Advanced homogenizer adopts the latest technology of our company, with unique structure and excellent efficiency.

● All the materials are fused with imported stainless steel, and the inner surface of the container is polished 300EMSH (sanitary grade), which meets sanitary requirements.

● Vacuum material suction, vacuum defoaming, the entire process is completed in a vacuum state, without bacterial infection, and prolongs the product shelf life.

● The shape is beautiful and elegant, and the appearance adopts special polishing technology, and the luster is like a mirror.

Toimintaperiaate

● The homogenous cutting head must not be operated in an empty pot due to its extremely high speed, so as not to affect the sealing degree after local heating.

● The ground wire is reliably grounded to ensure safety in electricity use.

● The shaft end of the homogenizer is turned right. Each time the motor is connected or not reactivated for a long time, you should activate and try turning. Varmista, että niitä ei ole

● The homogenizer is officially enabled to operate at the wrong time.

● Before each stirring starts, tick it to check whether there are any abnormalities in the stirring wall. If there is any, it should be eliminated immediately.

● Before stirring and vacuuming work, be sure to check whether the pot is flat with the pot cover, whether the pot mouth, material mouth cover, etc. are tightly covered, and seal it. Riippuu.

● Before the vacuum pump is turned off, the ball valve in front of the vacuum pump should be closed.

● The vacuum pump can be started and operated under the sealing condition of the homogenized pot. If there is a special need, an open-air atmospheric start pump, cannot operate for more than 3 minutes.

● The equipment must be powered off before any maintenance or cleaning is performed.

● Do not put your hands into the kettle during the operation of the equipment to prevent accidents.

● If there is any abnormal response during operation, stop running immediately and wait until the cause is found before turning on the computer.

Sovellus

●Ruoka ●Lääketeollisuus ●Kosmetiikka